Pergolas and Winter Gardens
Designed and Made in Estonia
Pergolas built to last
Our pergola and winter garden profile system was developed and designed in Estonia, and it is built to withstand demanding weather.
Many suppliers sell pergola systems that are not built for strong winds and changing weather. When you order from us, you can be sure your pergola will stay standing even after a big storm!
Why choose a Lariaare pergola?
-
The rainwater drainage system is hidden inside the posts.
Water runs from the roof into a gutter along the inner perimeter of the top beams, then into the post, and finally exits through an opening at the bottom of the post.
The system is easy to maintain and easy to access.
-
When designing our pergola and winter garden, we followed one principle: keep everything as simple as possible.
The glass walls and aluminium frame are weatherproof and need no maintenance.
The rainwater system is easy to reach for maintenance from both above and below.
-
In the design and engineering, we wanted the look to be as minimalist as possible. That is why we hid most of the connections without sacrificing access to them.
Electrical connections, drainage and other fixings are designed so that the end user can easily do maintenance themselves when needed.
-
You can choose whether to leave the sides of your pergola or winter garden open, or to add glass walls, sliding terrace glazing or glass doors.
For terrace glazing, you can choose glass walls with vertical profiles and brush seals, or a fully frameless all-glass solution. We also offer a range of locks, and glass doors can be fitted with a choice of hinges and handles.
All glass walls are made of tempered glass, 8–10 mm thick.
-
For a tempered glass roof, you can choose clear glass, tinted glass (bronze, grey or dark grey), frosted glass or even patterned glass.
Easy to order
1. Send an enquiry
Fill in the enquiry form and we will send you a personalised quote.
2. Measuring and approval
Once you accept the quote, our specialists come on site to take exact measurements and look at the specifics of the site. After measuring, we draw up your pergola on the computer and send you the drawings for approval.
3. Production
Once the drawings are approved, we start production.
4. Installation
Once the glass and frames are ready, we move on to installation. Our experienced installers make sure the installation goes smoothly, so you can start enjoying your new pergola!